XPol+SAPT, or “XSAPT”, was introduced by Jacobson and Herbert [751, 520] as a low-order-scaling, systematically-improvable method applicable to large systems. The idea is simply to replace the need for empirical parameters in the XPol method with on-the-fly evaluation of exchange-repulsion and dispersion interactions via pairwise-additive SAPT. (This basic idea has spawned several related approaches; see Ref. Lao:2015 for an overview of XSAPT-based methods.) Stated differently, XSAPT uses XPol to evaluate many-body (non-pairwise-additive) polarization effects, but then assumes that dispersion and exchange-repulsion interactions *are * pairwise additive, and evaluates them via pairwise SAPT0 or SAPT(KS) calculations.

In particular, the zeroth-order Hamiltonian for XSAPT is taken by the the sum of fragment Fock operators defined by the XPol procedure, and the perturbation is the usual SAPT intermolecular perturbation [Eq. eq:pairwise_perturbation] less the intermolecular interactions contained in the XPol fragment Fock operators. A standard SAPT0 correction is then computed for each pair of monomers, using Eq. eq:SAPT_interaction in conjunction with the modified perturbation, to obtain dimer interaction energy . The total XSAPT energy is then

(12.22) |

In this expression, we have removed the over-counting of two-electron interactions present in Hartree-Fock theory, effectively taking the *intra*fragment perturbation to first order. The generalization to a Kohn-Sham description of the monomers is straightforward, and is available in Q-Chem.

The inclusion of many-body polarization within the zeroth-order Hamiltonian makes the subsequent SAPT corrections less meaningful in terms of energy decomposition analysis. For instance, the first-order electrostatic correction in XSAPT is *not * the total electrostatic energy, since the former corrects for errors in the approximate electrostatic treatment at zeroth order (*i.e.*, the electrostatic embedding). The dispersion correction may be less contaminated, since all of the XSAPT modifications to the traditional SAPT perturbation are one-electron operators and therefore the pairwise dispersion correction differs from its traditional SAPT analogue only insofar as the MOs are perturbed by the electrostatic embedding. This should be kept in mind when interpreting the output of an XSAPT calculation, although Lao and Herbert [756, 757] later proposed a many-body energy decomposition scheme for XSAPT that extends traditional SAPT energy decomposition to systems containing more than two monomers. (The aforementioned contamination problems are avoid through pairwise corrections, comparing XSAPT results to traditional SAPT based on gas-phase monomers.) An XSAPT calculation is requested by setting the *$rem* variables XPOL and SAPT equal to TRUE and also setting XPOL_MPOL_ORDER = CHARGES.

Researchers who use Q-Chem’s XPol+SAPT code are asked to cite Refs. Jacobson:2011 and Herbert:2012. The latter contains a thorough discussion of the theory; a briefer summary can be found in Ref. Jacobson:2013.

**Example 12.283** Example showing an XPol+SAPT0 calculation using CHELPG charges and CPHF.

$rem BASIS CC-PVDZ METHOD HF XPOL TRUE XPOL_MPOL_ORDER CHARGES XPOL_CHARGE_TYPE QCHELPG SAPT TRUE SAPT_CPHF TRUE SYM_IGNORE TRUE $end $molecule 0 1 -- formic acid 0 1 C -1.888896 -0.179692 0.000000 O -1.493280 1.073689 0.000000 O -1.170435 -1.166590 0.000000 H -2.979488 -0.258829 0.000000 H -0.498833 1.107195 0.000000 -- formic acid 0 1 C 1.888896 0.179692 0.000000 O 1.493280 -1.073689 0.000000 O 1.170435 1.166590 0.000000 H 2.979488 0.258829 0.000000 H 0.498833 -1.107195 0.000000 $end

As mentioned above, the dispersion components of the (X)SAPT(KS) interaction energy are not of benchmark quality, even when tuned LRC functionals are employed [777]. The dispersion and exchange-dispersion terms are also the most expensive part of a SAPT0 or SAPT(KS) calculation, scaling as the fourth and fifth powers, respectively, of monomer size, whereas other terms are cubic scaling at worst. Both the efficiency and the accuracy of XSAPT(KS) calculations are thus improved if is replaced by an empirical atom–atom dispersion potential and those non-dispersion components are reformulated in the atomic orbital (AO) basis to avoid the four-index integral transformation that is required in the original, molecular orbital version of the method. The resulting method is called AO-XSAPT(KS)+D [755, 756, 757]; consult Ref. Lao:2015 for an overview.

An AO-XSAPT(KS)+D calculation is requested by setting SAPT_AO and SAPT_DISP_CORR equal to TRUE. There are three versions of the dispersion potential, a “first generation" (+D1) version [755], second-generation (+D2) version [756], and third-generation (+D3) version [757]; the user can select amongst these using SAPT_DISP_VERSION. Although all three versions exhibit similar performance for total binding energies [757], the +D2 and +D3 potentials were fit directly to *ab initio * dispersion potentials and do a much better job of reproducing individual energy components, as compared to +D1 [756, 757]. Furthermore, the training set was expanded in the third generation to eliminate the largest errors in +D2 calculations, which tend to be -stacked systems, and +D3 is the recommended dispersion correction.

As with XPol, the XSAPT and XSAPT(KS)+D methods do not function with a solvation model or with external changes. Currently, only single-point energies are available with no frozen orbitals.

Researchers who use XSAPT(KS)+D are asked to cite Ref. Lao:2012b for +D1, Ref. Lao:2013 for +D2, or Ref. Lao:2015 for +D3. The AO implementation of XSAPT is described in Ref. Lao:2016.

SAPT_AO

Request an atomic-orbital version of SAPT

TYPE:

BOOLEAN

DEFAULT:

FALSE

OPTIONS:

TRUE

Use an AO version of SAPT.

FALSE

Use a MO version of SAPT.

RECOMMENDATION:

Non-dispersion terms are calculated by AO-SAPT with scaling.

SAPT_DISP_CORR

Request an empirical dispersion potential instead of calculating and directly

TYPE:

BOOLEAN

DEFAULT:

FALSE

OPTIONS:

TRUE

Use a dispersion force field.

FALSE

calculate and .

RECOMMENDATION:

Using dispersion potentials combined with AO version of SAPT reduces the scaling from to with respect to monomer size.

SAPT_DISP_VERSION

Controls which dispersion potential is used for SAPT

TYPE:

INTEGER

DEFAULT:

3

OPTIONS:

1

Use the “first generation” (+D1) dispersion potentials from Hesselmann [780, 755].

2

Use the “second generation” (+D2) dispersion potentials from Podeszwa. [781, 756].

3

Use the “third generation” (+D3) dispersion potentials from Lao [757].

RECOMMENDATION:

Use +D3. Whereas +D1 was fit to reproduce binding energies, the +D2 and +D3 potentials were fit directly to dispersion energies computed at the SAPT(DFT) and SAPT2+(3) levels, and performs well for both total binding energies as well as individual energy components [756, 757]. In developing +D3, the training set was expanded to eliminate outliers involving stacking [757].

**Example 12.284** AO-XSAPT(KS)+D3 calculation of water-water interaction.

$rem sym_ignore true exchange gen basis aug-cc-pVTZ xpol true ! must be set to true for sapt jobs too xpol_mpol_order charges xpol_charge_type qchelpg xpol_omega true xpol_print 3 sapt_print 3 sapt true sapt_ao true sapt_order 2 ! can be set to 1, ELST or RSPT sapt_basis projected ! monomer, dimer (if only 2 monomers), or projected sapt_disp_corr true sapt_disp_version 3 mem_total 46000 mem_static 4000 ao2mo_disk 35000 thresh 12 scf_convergence 7 lrc_dft true chelpg true chelpg_dx 5 chelpg_head 30 chelpg_h 110 chelpg_ha 590 $end $xc_functional x wPBE 1.0 c PBE 1.0 $end $lrc_omega 502 502 $end $molecule 0 1 -- 0 1 O -1.551007 -0.114520 0.000000 H -1.934259 0.762503 0.000000 H -0.599677 0.040712 0.000000 -- 0 1 O 1.350625 0.111469 0.000000 H 1.680398 -0.373741 -0.758561 H 1.680398 -0.373741 0.758561 $end

For energy decomposition analysis using, *e.g.*, AO-XSAPT(KS)+D3, three individual calculations must be performed: AO-XSAPT(KS)+D3, AO-SAPT(KS)+D3, and AO-SAPT0, as demonstrated in the example below. The electrostatic, exchange, and dispersion energies can be obtained in the AO-SAPT(KS)+D3 calculation by searching the keywords “E1_elst”, “E1_exch”, and “Empirical E2_disp + E2_exch-disp”, respectively. The induction energy includes three parts. First, there is (“E2_ind” and “E2_exch-ind”), obtained from the AO-SAPT(KS)+D3 calculation. The second part is the total energy difference between AO-XSAPT(KS)+D3 and AO-SAPT(KS)+D3, and the total energy can be obtained by searching for “SAPT corrected total energy” in both calculations. This second part provides the many-body polarization and approximate infinite-order response correction. The final part of the energy decomposition accounts for higher-order polarization effects that can be approximated by searching the AO-SAPT0 calculation for the keyword “dSCF” ( correction). The total binding energy is the sum of electrostatic, exchange, induction, and dispersion components obtained above.

**Example 12.285** The AO-XSAPT(KS)+D3 energy-decomposition analysis for water dimer, which requires three individual calculations.

$comment (1) AO-XSAPT(KS)+D3 $end $rem sym_ignore true exchange gen basis cc-pVDZ xpol true ! must be set to true for sapt jobs too xpol_mpol_order charges ! gas or charges xpol_charge_type qchelpg ! qlowdin,qmulliken,qchelpg xpol_omega true xpol_print 3 sapt_print 3 sapt true sapt_ao true sapt_order 2 ! can be set to 1, ELST or RSPT sapt_basis projected ! monomer, dimer (if only 2 monomers), or projected sapt_disp_corr true sapt_disp_version 3 mem_total 46000 mem_static 4000 ao2mo_disk 35000 thresh 12 scf_convergence 7 lrc_dft true chelpg true chelpg_dx 5 chelpg_head 30 chelpg_h 110 chelpg_ha 590 $end $xc_functional x wPBE 1.0 c PBE 1.0 $end $lrc_omega 502 502 $end $molecule 0 1 -- 0 1 O -1.551007 -0.114520 0.000000 H -1.934259 0.762503 0.000000 H -0.599677 0.040712 0.000000 -- 0 1 O 1.350625 0.111469 0.000000 H 1.680398 -0.373741 -0.758561 H 1.680398 -0.373741 0.758561 $end @@@ $comment (2) AO-SAPT(KS)+D3 $end $rem sym_ignore true exchange gen basis cc-pVDZ xpol true ! must be set to true for sapt jobs too xpol_mpol_order gas ! gas or charges xpol_omega true xpol_print 3 sapt_print 3 sapt true sapt_ao true sapt_order 2 ! can be set to 1, ELST or RSPT sapt_basis projected ! monomer, dimer (if only 2 monomers), or projected sapt_disp_corr true sapt_disp_version 3 mem_total 46000 mem_static 4000 ao2mo_disk 35000 thresh 12 scf_convergence 7 lrc_dft true $end $xc_functional x wPBE 1.0 c PBE 1.0 $end $lrc_omega 502 502 $end $molecule 0 1 -- 0 1 O -1.551007 -0.114520 0.000000 H -1.934259 0.762503 0.000000 H -0.599677 0.040712 0.000000 -- 0 1 O 1.350625 0.111469 0.000000 H 1.680398 -0.373741 -0.758561 H 1.680398 -0.373741 0.758561 $end @@@ $comment (3) AO-SAPT0 $end $rem sym_ignore true exchange hf basis cc-pVDZ xpol true ! must be set to true for sapt jobs too xpol_mpol_order gas ! gas or charges xpol_print 3 sapt_print 3 sapt true sapt_ao true sapt_order 2 ! can be set to 1, ELST or RSPT sapt_basis dimer ! monomer, dimer (if only 2 monomers), or projected sapt_cphf true sapt_dscf true mem_total 46000 mem_static 4000 ao2mo_disk 35000 thresh 12 scf_convergence 7 $end $molecule 0 1 -- 0 1 O -1.551007 -0.114520 0.000000 H -1.934259 0.762503 0.000000 H -0.599677 0.040712 0.000000 -- 0 1 O 1.350625 0.111469 0.000000 H 1.680398 -0.373741 -0.758561 H 1.680398 -0.373741 0.758561 $end